Loading...
Loading...
1. , N Kumar, BK Sarkar, S Maity, Leakage Based Condition Monitoring and Pressure Control of the Swashplate Axial Piston Pump, Gas Turbine India Conference, December, 2019, IIT Chennai, India. [2019-2020]
2. , A. Sahoo, S. K. Dwivedy, and P. S. Robi, “Development of a PID Control Strategy for a Compact autonomous underwater vehicle,” in Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2019), June 9-14, 2019, Glasgow, Scotland.. [2019-2020]
3. , U. Kashyap, K. Das, B. K. Debnath, U. Kashyap, S. K. Saha, Helicity Density Study of Rectangular Vortex Generator with Secondary Surfaces over It, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference, December 28- 31, 2019, IIT Roorkee, Roorkee, India.. [2019-2020]
4. , A. Das, R. S. Das, K. Das, Investigation on Fluid Flow, Heat and Mass transfer Characteristics in a LiCl-H2O Falling Film Absorber, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference, December 28-31, 2019, IIT Roorkee, Roorkee, India.. [2019-2020]
5. , Bezbaruah, P.J., Kumar, R., Das, R.S., “Thermohydraulic performance analysis of solar air heater with helical roughness,” Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer conference (IHMTC-2019), pp. 233-237.. [2019-2020]
6. , S. Kr. Rajbongshi, D. K. Sarma, Application of Taguchi’s orthogonal array and overall evaluation criteria in turning of AISI D2 steel in dry and forced air-cooled environment, 1 st International Conference on Emerging Trends in Mechanical Engineering (ICETME-2018), department of Mechanical Engineering, Srinivasa Ramanujan Institute of Technology, Anantapur, Andhra Pradesh, India, Period 20-12- 2018 to 22-12-2018, Proceedings published in Springer Nature Singapore Pte Ltd., Page -177-185, 2020. [2019-2020]
7. , D. K. Sarma, S. Kr. Rajbongshi, A study in turning of AISI D2 steel with Textured and Non-textured coated carbide tool at the flank face, 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (IMMT 2019), Period 20-11-2019 to 22-11-2019, BITS PILANI, Dubai Campus, UAE, Page -6, 2019. [2019-2020]
8. , H. Dutta, K. Debnath, D.K. Sarma, Improving the Performance of μED-Milling using Assisting Electrode for Fabricating Micro-Channels in CFRP Composites, 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (IMMT 2019), Period 20-11-2019 to 22-11-2019, BITS PILANI, Dubai Campus, UAE, Page -6, 2019. [2019-2020]
9. , Md. A. Ansari, B. K. Debnath, and T. Bose, Measurement of the extent of cavitation using vibration monitoring in a Francis turbine, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Period - December 28-31, 2019, Place - IIT Roorkee, Roorkee, India. http://ishmtdigitallibrary.com/conferences/18a7131602a3b186,7a56f09f53571cac,4f6 3e7d857012f7e.html. [2019-2020]
10. , S. Das, B. K. Debnath, and R. S. Das, Effect on combustion behaviour in the presence of ceramic porous materials on the piston bowl of a diesel engine, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Period -December 28-31, 2019, Place - IIT Roorkee, Roorkee, India. http://ishmtdigitallibrary.com/conferences/18a7131602a3b186,7a56f09f53571cac,775 89e5408394c7b.html. [2019-2020]
11. , Deka, S., Babu, P.R. and Rahang, M., 2020. Finite element analysis on the effect of the cross sectional shape on the response of a stress wave force balance. In 6th National Symposium on Shock Waves (NSSW-2020), held from 26-28 February 2020.. [2019-2020]
12. , Deka, S., Babu, P.R. and Rahang, M., 2020. Influence of stress bar length on the response of a stress wave force balance using finite element analysis. International Conference on Advances in Mechanical Engineering (ICAME-2020), during 10-11th January 2020.. [2019-2020]
13. , Deka, S., Babu, P.R. and Rahang, M., 2019. Dynamic Calibration of a Single Component accelerometer force balance under application of impulse loads. In International Heat and Mass Transfer Conference (IHMTC), during December 28-31, 2019, Place - IIT Roorkee, Roorkee, India. [2019-2020]
14. , Deka, S., Babu, P.R. and Rahang, M., 2019. Dynamic calibration of a stress wave force balance under various supports and loads using finite element analysis. In the 32nd International Symposium on Shock Waves (ISSW 32) during 14th to 19th July 2020 at NUS Singapore.. [2019-2020]
15. , Mazarbhuiya, R. M. and Rahang, M., Deposition of Tungsten and Copper Particle on CFRP Composite. (ICRAME 2020). [2019-2020]
16. , Mazarbhuiya, R. M. and Rahang, M., Surface Modification of Aluminium and its Parametric Optimization using Grey Relational Analysis. Materials today Proceedings. doi.org/10.1016/j.matpr.2020.02.327.. [2019-2020]
17. , Mazarbhuiya, R. M. and Rahang, M., 2020. Parametric Study of Photochemical Machining of Aluminium Using Taguchi Approach. In Advances in Mechanical Engineering (pp. 497-504). Springer, Singapore.. [2019-2020]
18. , Mazarbhuiya, R. M. and Rahang, M., 2020. Multi-objective Optimization of Photochemical Machining Parameters Using Taguchi Grey Relational Analysis. In Emerging Trends in Mechanical Engineering (pp. 283-291). Springer, Singapore.. [2019-2020]
19. , Mazarbhuiya, R. M. and Rahang, M., 2019, March. Parametric Optimization in Photochemical Machining of Aluminium Using Taguchi Method. In IOP Conference Series: Materials Science and Engineering (Vol. 491, No. 1, p. 012033). IOP Publishing.. [2019-2020]
20. , S. Majumder, A. Ghosh, D. N. Basu, G. Natarajan, Development of an IB-TLB solver for fluid-particle interaction in energy management systems, International Conference on Sustainable Energy and Green Technology (SEGT 2019), IOP Conference Series: Earth and Environmental Sciences, 463 (2020), 0120144.. [2019-2020]
21. , N. Hanuman, T. Bose, Bicoherence based study of non-linear intermodulation in delaminated CFRP plate, Conference & Exhibition of the society for NDT (NDE 2019), Period: 5-7 December, Place: Bangalore, 2019.. [2019-2020]
22. , S. Roy, T. Bose, K. Debnath, Nonlinear Ultrasonic Wave Spectroscopy for Detecting Local Defect Resonance Frequency in Delaminated GLARE Plate, IWSHM 2019, Period- 10-12 September, Place- Stanford University, 2019.. [2019-2020]
23. , T. Bose, N. Hanuman, Fully acoustic non-destructive testing (NDT) for carbon fiber reinforced plastic (CFRP) plate, SINCE 2019, Period- 4-5 December, PlaceSingapore, 2019.. [2019-2020]
24. , Alom, N., Kumar, N., and Saha, U. K., 2019. Analyzing the effect of shaft and endplates of a newly developed elliptical-bladed Savonius rotor from wind tunnel tests, Paper No. OMAE2019-95570, ASME 38th International Conference on Ocean, Offshore and Arctic Engineering, June 9-14, 2019, Glasgow, Scotland, UK.. [2019-2020]
25. , Alom N, Das R, and Saha U. K., 2019. A Differential Evolution-Based Inverse Method to Optimize Blade Configurations in Elliptical-Bladed Savonius Wind Turbines, Paper No. GTIndia2019-2352, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.. [2019-2020]
26. , Alom N, Das R, and Saha U. K., 2019. Optimization of aerodynamic parameters of an elliptical-Bladed Savonius wind rotor using multi-objective genetic algorithm, Paper No. GTIndia2019-2346, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.. [2019-2020]
27. , Alom N, and Saha U. K., 2019. Determining the optimal location of vent augmenters in an elliptical-bladed Savonius rotor, Paper No. GTIndia2019-2344, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.. [2019-2020]
28. , P Venkaiah, BK Sarkar, Modelling and Control of the Hydraulically Actuated Horizontal Axis Wind Turbine Pitch System, Gas Turbine India Conference, December, 2019, IIT Chennai, India.. [2019-2020]
29. , J, Vinod1 , P. Kumar1 and B. K. Sarkar, Modelling of the multiple Francis turbine by velocity diagram for speed control application, The 10th TSME International Conference on Mechanical Engineering, Pattaya, Thailand, 10th – 13rd December 2019,. [2019-2020]
30. , L. Kushwaha1 , P. Venkaiah1 and B. K. Sarkar, Performance analysis of vertical axis wind turbine with optimised pitch angle variation, The 10th TSME International Conference on Mechanical Engineering, Pattaya, Thailand, 10th – 13rd December 2019.. [2019-2020]
31. , G. Bala Murali1, P. K. Sahu, B.B.V.L. Deepak., B.B. Biswal, Modified BAT Algorithm for Optimum Assembly Sequence Planning, IOP Conference Series: Materials Science and Engineering, Volume 377, conference 1.. [2018-2019]
32. , B. K. Khamari, P. K. Sahu, B B Biswal, Microstructure Analysis of Arc Welded Mild Steel Plates, IOP Conference Series: Materials Science and Engineering, Volume 377, conference 1. [2018-2019]
33. , Comparative Study of Two Immersed Boundary Approaches in the Lattice Boltzmann Framework, Arnab Ghosh, Sambit Majumder, Ganesh Natarajan, Dipankar Narayan Basu, 7th International Conference on Fluid Mechanics and Fluid Powers, December 10-12, 2018, IIT Bombay, Mumbai.. [2018-2019]
34. , Alom, N., Kumar, N., and Saha, U. K., 2019. Analyzing the effect of shaft and end-plates of a newly developed elliptical-bladed Savonius rotor from wind tunnel tests, Paper No. OMAE2019- 95570, ASME 38th International Conference on Ocean, Offshore and Arctic Engineering, June 9-14, 2019, Glasgow, Scotland, UK.. [2018-2019]
35. , Alom, N., Borah, B., and Saha, U. K., 2018. An insight into the drag and lift characteristics of modified Bach and Benesh profiles of Savonius rotor, 4th International Symposium on Hydrogen Energy, Renewable Energy and Materials (HEREM), June 13–14, Bangkok, Thailand (Also appears in Energy Procedia, Vol. 144, pp: 50-56).. [2018-2019]
36. , M. Roy Choudhury and K. Debnath. Experimental Analysis of Failure Load in Single-Lap Hybrid Joint (Bonded/Bolted) of Green Composites. 40th MATADOR International Conference on Advanced Manufacturing and Design (MATADOR-2019), Hangzhou, China, 8-10th July, 2019.. [2018-2019]
37. , P.K. Gupta and K. Debnath. Experimental Study on Electro Chemical Discharge Machining of Sustainable Materials. Third International Conference on Sustainable Energy and Environmental Challenges (3rd SEEC), Indian Institute of Technology Roorkee, Uttarakhand, India, 18-21st December, 2018.. [2018-2019]
38. , S. Vishwakarma, K. Debnath, and B.K. Debnath. Thermal Performance Study of Helically Grooved Absorber Tubes for Parabolic Trough Solar Collector. Proceedings of the ASME 2018 Power Conference (ASME, POWER 2018), The Disney’s Contemporary Resort, Lake Buena Vista, USA, 24-28th June, 2018, pp. V001T06A009.. [2018-2019]
39. , S. Roy, and B. K. Debnath, Heat transfer enhancement of sensible energy storage for low temperature application, Proceedings of the ASME 2018 Power and Energy Conference (PowerEnergy2018), Lake Buena Vista, Florida, USA, June 24-28, 2018, pp. V001T06A010.. [2018-2019]
40. , S. Roy, T. Bose, and K. Debnath. Analytical and Numerical Study of Local Damage Resonance Frequencies in Fibre Metal Laminates. 2nd International Conference on Energy, Power and Environment: Towards Smart Technology (ICEPE 2018), National Institute of Technology Meghalaya, Meghalaya, India, 1-2nd June, 2018, pp. 1-5.. [2018-2019]
41. , S. Roy, T. Bose. Bicoherence Analysis based Delamination Detection in Glass Fibre Reinforced Polymer Composite Plate. Conference and exhibition on Non-destructive evaluation (NDE 2018), Navi Mumbai, India, 19-21 December, 2018.. [2018-2019]
42. , N. S. V. N. Hanuman, T. Bose. Acoustic non-destructive evaluation of Glass-Fibre Reinforced Plastic (GFRP) Plate. Conference and exhibition on Non-destructive evaluation (NDE 2018), Navi Mumbai, India, 19-21 December, 2018.. [2018-2019]
43. , S. Roy, T. Bose, K. Debnath. Detection of Local Defect Resonance Frequencies for Defect Imaging: a Nonlinear Ultrasound Based Approach. International conference on Recenet Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, India, 8-10 November, 2018.. [2018-2019]
44. , M. Vashum, S. Roy, T. Bose. Shear Behaviour of the Delaminated Glass Fiber Reinforced Composite Laminates. International conference on Recent Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, India, 8-10 November, 2018.. [2018-2019]
45. , Sanjib Kr. Rajbongshi, D. K. Sarma, M. A. Singh, A brief review of white layer formation in hard machining with a case study, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Period 08-11-18 to 10-11-18, 2018, NIT Meghalaya, Shillong, India, Page -6, 2018.. [2018-2019]
46. , M. A. Singh, D. K. Sarma, Sanjib Kr. Rajbongshi, O. Hanzel, P. Šajgalík, Investigation of machining capabilities of 2.5 vol. % MWCNT Al2 O3 composites in μ-EDM, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Period 08-11-18 to 10-11- 18, 2018, NIT Meghalaya, Shillong, India, Page -6, 2018.. [2018-2019]
47. , S. Kr. Rajbongshi, D. K. Sarma, Process parameters optimization using Taguchi’s orthogonal array and grey relational analysis during hard turning of AISI D2 steel in forced air-cooled condition, 4th International Conference on Mechanical and Aeronautical Engineering (ICMAE 2018), Hong Kong Society of Mechanical Engineers, Period 13-12-2018 to 16-12-2018, Bangkok, Thailand, Page -6, 2018.. [2018-2019]
48. , Sushmita Deka, Ramesh Babu Pallekonda, Maneswar Rahang, Dynamic Calibration of a Three Component Accelerometer Force Balance System and Force Prediction using Deconvolution. International Conference on Recent Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, India, 8-10 November, 2018.. [2018-2019]
49. , Sushmita Deka, Ramesh Babu Pallekonda, Maneswar Rahang, Dynamic Calibration of a stress wave force balance under various supports and loads using finite element analysis. International Symposium on Shock Waves (ISSW 32), conducted by NUS at Engineering Avenue, NUS Singapore, During 15-19th July 2019.. [2018-2019]
50. , H. Barman, R.S. Das. Simultaneous Heat and Mass Transfer Analysis in Falling Film Absorber. International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Nov 8-10, 2018.. [2018-2019]
51. , P. J. Bezbaruah, R.S. Das, B.K. Sarkar. 2D CFD Analysis of Solar Air Collector with Miller Teeth Shaped Roughness International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Nov 8-10, 2018.. [2018-2019]
52. , Rashed Mustafa Mazarbhuiya and Maneswar Rahang, Parametric Optimization in Photochemical Machining of Aluminium Using Taguchi Method 4th International Conference on Mechanical and Aeronautical Engineering IOP Conf. Series: Materials Science and Engineering 491 (2019) 012033 doi:10.1088/1757-899X/491/1/012033. [2018-2019]
53. , Rashed Mustafa Mazarbhuiya and Maneswar Rahang, Multi-Objective Optimization of Photochemical Machining parameters using Taguchi-Grey Relational Analysis, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2018), Anantapur, India.. [2018-2019]
54. , Rashed Mustafa Mazarbhuiya and Maneswar Rahang, Parametric Study of Photochemical Machining of Aluminium using Taguchi Approach International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Nov 8-10, 2018.. [2018-2019]
55. , S. Mohapatra,R .N. Mahapatra, B. B.Biswal, ,B. Balabantray, A. K. Behera, A Deterministic Model for Remanufacturing Inventory for Reverse Supply Chain ICECNS, 19-21 October 2018. [2018-2019]
56. , B K Balabantaray, R N Mahapatra and B B Biswal, “ Efficient Part Recognition Method in Vision Guided Robots using Orthogonal Moments, International Journal of Engineering &Technology, ICECNS, 19-21 October 2018.. [2018-2019]
57. , G. B. Mahanta, B. B. V. L. Deepak, B. B. Biswal, Amruta Rout, and B. M. Gunji, “Design Optimization of Robotic Gripper Links Using Accelerated Particle Swarm Optimization Technique.” In Proceedings of the Second International Conference on Computational Intelligence and Informatics, 2018, pp. 337-345. Springer, Singapore. [2017-2018]
58. , G. B. Mahanta, Amruta Rout, B. M. Gunji, B. B. V. L. Deepak, and B. B. Biswal, “Application of Hybrid Nelder-Mead Bat Algorithm to Improve the Grasp Quality during the Automated Robotic Grasping.” Procedia Computer Science 133, 2018.. [2017-2018]
59. , B. M. Gunji, B.B.Deepak, B.B. Biswal, G.B.Mahanta, and Amruta Rout, , Robotic Optimal Assembly Sequence Using Improved Cuckoo Search Algorithm. Procedia Computer Science, 2018, 133, pp.323-330.. [2017-2018]
60. , Amruta Rout, M. Dileep, G.B. Mahanta, B. B. V. L. Deepak, and B. B. Biswal. “Optimal time-jerk trajectory planning of 6 axis welding robot using TLBO method.” Procedia Computer Science133 ,2018, 537-544.. [2017-2018]
61. , G. B. Mahanta, B. B. V. L. Deepak, and B. B.Biswal, “Geometric modelling and design optimization of a robotic gripper using meta-heuristic optimization techniques”, International Conference on Robotics and Artificial Intelligence” May 21-22, 2018 Los Angeles USA. [2017-2018]
62. , B. M. Gunji, P. K .Sahu, B. B. V. L. Deepak, and B. B. Biswal.”Modified BAT Algorithm for Optimum Assembly Sequence Planning.” In IOP Conference Series: Materials Science and Engineering, , 2018, vol. 377, no. 1, p. 012091. IOP Publishing.. [2017-2018]
63. , B. M. Gunji, B.B. Deepak, MR. Bahubalendruni and B.B. Biswal, (2017), Optimal Assembly Sequence Planning Using Hybridized Immune-Simulated Annealing Technique. Materials Today: Proceedings. 2017 Jan 1;4(8):8313-22.. [2017-2018]
64. , J. Vinod, P. Venkaiah, B. K. Sarkar, Francis Turbine Igv Control Under Force Estimation, INCOM18, Period -4 t0 6 January 2018, Place -Jadavpur University, Kolkata, Page -769-772, 2018.. [2017-2018]
65. , P. Venkaiah, K. Das, B. K. Sarkar, Power Control Of The Small Scale Variable Speed Variable Pitch Wind Turbine, INCOM18, Period -4 t0 6 January 2018, Place -Jadavpur University, Kolkata, Page -795-798, 2018.. [2017-2018]
66. , P. Venkaiah B. K.. Sarkar, Position Control of the Hydraulically Actuated Francis Turbine Inlet Guide Vane, ASME 2017 Power Conference Joint With ICOPE-17 collocated with the ASME 2017 11th International Conference on Energy Sustainability, the ASME 2017 15th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2017 Nuclear Forum, Period -June 26–30, 2017, Place -Charlotte, North Carolina, USA, Page -V002T09A004; 9 pages, 2017.. [2017-2018]
67. , P. Venkaiah, K. Das, E. K. Mawsor and B. K. Sarkar, Wind Turbine Pitching System Design And Controlin The Context Of NorthEast India, Proceedings of the 6th International Conference in Advances in Energy Research (ICAER), Dec 12- 14, 2017, IIT Bombay, India.. [2017-2018]
68. , M.A. Singh, D.K. Sarma, H.M. Kalita, C. Marthong, Analysis of material removal and surface characteristics in machining multi walled carbon nanotubes filled alumina composites by WEDM process, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.. [2017-2018]
69. , C. Marthong, D.K.Sarma, H.M. Kalita, Effect of aspect ratio and volume fraction of PET fibre on the mechanical properties of PFRC, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.. [2017-2018]
70. , H.M. Kalita, A.K. Sarma, C. Marthong, D.K.Sarma, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.. [2017-2018]
71. , A.K.S. Kushwaha, R.S. Das, A simplified ANN model to assess the performance of a liquid desiccant air-conditioning system, International Conference on Renewable and Sustainable Energy, Period -12-13 April, Place -Coimbatore, 2017.. [2017-2018]
72. , P.J. Bezbaruah, A. Das, R.S. Das, B.K. Sarkar, Numerical investigation on triangular fin based solar air heater, 6th International Conference on Advances in Energy Research. Paper ID: 361, December 12-14, 2017, IIT Bombay.. [2017-2018]
73. , P. Kumar, A. Parveen, R.S. Das, “Coupled Heat and Mass Transport in an Indirect Membrane Contactor with Wicking Material for Liquid Desiccant Dehumidification”, Paper No. IHMTC2017-05-0607, International Heat and Mass Transfer Conference (IHMTC-2017), December 27-10, 2017, BITS Pilani, Hyderabad.. [2017-2018]
74. , Alom, N., Kumar, N and Saha, U.K., 2017. “Aerodynamic performance of an elliptical-bladed Savonius rotor under the influence of number of blades and shaft,” Paper No. GTIndia2017-4554, ASME Gas Turbine India Conference, December 7–8, Bangalore, India.. [2017-2018]
75. , Alom, N., Borah, B., and Saha, U.K., 2018, “An insight into the drag and lift characteristics of modified Bach and Benesh profiles of Savonius rotor,” Energy Procedia, Vol. 144, pp. 50-56.. [2017-2018]
76. , A.C. Chandekar and B.K. Debnath, “Design and Optimization of Air-Biogas Mixing Device for Dual Fuel Diesel Engines”, Proceedings of the 6th International Conference in Advances in Energy Research (ICAER), Paper No. 221, Dec 12- 14, 2017, IIT Bombay, India.. [2017-2018]
77. , A.C. Chandekar and B.K. Debnath, “Investigating the Flow Characteristics of an Air-Biogas Mixing Device through Computational Fluid Dynamics”, Proceedings of the 44th National Conference on Fluid Mechanics and Fluid Power (FMFP), Paper No. 167, Dec 14-16, 2017, Kerala, India.. [2017-2018]
78. , S. Roy, T. Bose, K. Debnath, “Influence of the Delamination Geometry on the Shear Behaviour of Glass/Epoxy Composites”, National Conference on Advanced Materials, Manufacturing and Metrology (NCAMMM 2018), February 16-17, 2018, CSIRCMERI, Durgapur, India.. [2017-2018]
79. , P. Nemalipuri, M. K. Pradhan, H. C. Das, R. N. Mahapatra, B. Das, “Prediction of Air Pollutants Emitting from Chimney of A CHP Using CFD” National Conference on Emerging Trends in Engineering, Science and Manufacturing, (ETESM-2018), 28th -29 th Mar. 2018, IGIT, Sarang.. [2017-2018]
80. , J. P. Panda, H. V. Warrior and S. Maity, Pressure Strain Correlation for Decaying Homogeneous Turbulence, 6th International Conference on FMFP, Period -15-17 Dec, Place -MNNIT Allahabad, Page -53, 2016.. [2016-2017]
81. , B. K. Sarkar R Saha S. Mookherjee D. Sanyal, Speed Control of Hydraulically and Electrically Coupled Multiple Francis Turbines, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Period -15th-17th December, 2016, Place -MANITA, Allahabad, 2016. [2016-2017]
82. , U. Kashyap, K. Das and B.K. Debnath, Effect of surface texture of vortex generator in heat transfer enhancement, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP), Period -December 15-17, 2016, Place -MNNITA, Allahabad, U.P., India, 2016.. [2016-2017]
83. , A.K.S. Kushwaha, R.S. Das, A simplified ANN model to assess the performance of a liquid desiccant air-conditioning system, International Conference on Renewable and Sustainable Energy, Period -12-13 April, Place -Coimbatore, 2017.. [2016-2017]
84. , M. Roy Choudhury, K. Debnath, and V. Upadhyay, Drilling of Unfilled Hemp/Epoxy and Fly Ash Filled Hemp/Epoxy Composites: Analysis of Force and Temperature, Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXV), Period -22-25th January, Place -The University of Auckland, Auckland, New Zealand, Page -750-765, 2017.. [2016-2017]
85. , I. Singh, U.K. Komal, P.K. Rakesh and K. Debnath, Is Hole Making in Fiber Reinforced Polymers (FRPs) a Challenging Task?, Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXV), Period -22- 25th January, Place -The University of Auckland, Auckland, New Zealand, Page -572-579, 2017.. [2016-2017]
86. , K. Debnath, M. Roy Choudhury, S. Chaitanya, I. Singh, and T.S. Srivatsan, Drilling Investigation of Injection Molded Short Sisal Fiber Reinforced Polypropylene Composites, Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXV), Period -22-25th January, Place -The University of Auckland, Auckland, New Zealand, Page -738-749, 2017.. [2016-2017]
87. , M. Roy Choudhury, J. Ghosh, V. Upadhyay, and K. Debnath, Influence of Tool Geometry and Cutting Parameters on the Quality of Hole during Drilling of Hemp Fibre Reinforced Composites, The 4th International Conference on Advances in Materials and Materials Processing (iCAMMP-iv), Period -5-7th November, Place -Indian Institute of Technology Kharagpur, West Bengal, India, 2016.. [2016-2017]
88. , Alom N., Kolaprathi S.C., Gadde S.C., and Saha U.K., 2016, “Aerodynamic design optimization of elliptical-bladed Savoniusstyle wind turbine by numerical simulations”, Paper No. OMAE2016-55095, ASME 35th International Conference on Ocean, Offshore and Arctic Engineering, June 19-24, Busan, South Korea.. [2016-2017]
89. , N. Alom, U.K.Saha, 2017. “Arriving at the optimum overlap ratio for an elliptical-bladed Savonius rotor,” Paper No. GT2017- 64137, ASME Turbo Expo Turbine Technical Conference and Exposition, June 26–30, Charlotte, North Carolina, USA.. [2016-2017]
90. , N. Alom, U.K.Saha,2016, “Numerical Optimization of Semicircular-bladed Savonius Rotor using Vent Augmenters”, 5th International Conference on Asian Congress of Gas Turbine, November 14-16, IIT Bombay, Mumbai, India.. [2016-2017]
91. , P. R. Babu, V. Kulkarni and S. K. Dwivedy, Calibration of Single Component Accelerometer Force Balance and Vibrometer Balance using Short Duration Step Load, 5th National Conference on Wind Tunnel Testing, Period -16-17 March, Place – Dept of Aerospace Engineering, MIT Campus, Chennai, Page -53, 2016.. [2016-2017]
1. , S Datta, BB Biswal, Experimental studies on electro-discharge machining of Inconel 825 super alloy using cryogenically treated tool/workpiece, Measurement 145, 611- 630. [2019-2020]
2. , A Das, O Pradhan, SK Patel, SR Das, BB Biswal, Performance appraisal of various nanofluids during hard machining of AISI 4340 steel, Journal of Manufacturing Processes 46, 248-270. [2019-2020]
3. , S Panda, D Mishra, BB Biswal, An approach for design optimization of 3R manipulator using Adaptive Cuckoo Search algorithm, Mechanics Based Design of Structures and Machines, 1-26. [2019-2020]
4. , A Rout, D Bbvl, BB Biswal, Optimal trajectory generation of an industrial welding robot with kinematic and dynamic constraints, Industrial Robot: the international journal of robotics research and application. [2019-2020]
5. , A Rout, B Deepak, BB Biswal, GB Mahanta, Optimal trajectory planning of industrial robot for improving positional accuracy, Industrial Robot: the international journal of robotics research and application. [2019-2020]
6. , A Das, SK Patel, BB Biswal, N Sahoo, A Pradhan, Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel, Measurement 150, 107079. [2019-2020]
7. , OP Sahu, BB Biswal, Sensor Integrated Robotic Hand for Industrial Application, International Journal of Mechanical Engineering and Robotics Research 9 (1 …. [2019-2020]
8. , A Das, SR Das, SK Patel, BB Biswal, Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts, Mechanics & Industry 21 (1), 110. [2019-2020]
9. , A Rout, GB Mahanta, D Bbvl, BB Biswal, Kinematic and Dynamic Optimal Trajectory Planning of Industrial Robot Using Improved Multi-objective Ant Lion Optimizer, Journal of The Institution of Engineers (India): Series C, 1-11. [2019-2020]
10. , BM Gunji, B Deepak, BB Biswal, Effect of Considering Secondary Parts as Primary Parts for Robotic Assembly Using Stability Graph, Arabian Journal for Science and Engineering 45 (2), 743-764. [2019-2020]
11. , GB Mahanta, A Rout, DBB V. L, BB Biswal, An improved multi-objective antlion optimization algorithm for the optimal design of the robotic gripper, Journal of Experimental & Theoretical Artificial Intelligence 32 (2), 309-338. [2019-2020]
12. , A Das, SR Das, SK Patel, BB Biswal, Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel, Machining Science and Technology 24 (2), 291-320. [2019-2020]
13. , A Rout, D Bbvl, BB Biswal, GB Mahanta, A fuzzy-regression-PSO based hybrid method for selecting welding conditions in robotic gas metal arc welding, Assembly Automation.. [2019-2020]
14. , S. Mohapatra, A. K. Behera, R. Mahapatra, H. Das, A deterministic inventory model in reverse supply chain,Journal of Modelling in Management,15,318-338,2019. [2019-2020]
15. , S. Mohapatra, A. K. Behera, R. Mahapatra, H. Das, M. Pradhan, A deterministic inventory model of aluminium refreshment cans in reverse supply chain, International journal of services and operations management, (Accepted May 2019).. [2019-2020]
16. , P. Venkaiah & B. K. Sarkar, Hydraulically actuated horizontal axis wind turbine pitch control by model free adaptive controller, Renewable Energy, 147, 55-68, 2020.. [2019-2020]
17. , A. Ranjan, S. S. Yadav, K. Das, Thermal and flow analysis of split drop shaped pin fins for improved heat transfer rate, Journal of Institution of Engineers (India) Series C, 101, 375–382(2020). [2019-2020]
18. , U. Kashyap, K. Das, B. K. Debnath, Numerical and experimental study of effect of secondary surfaces fixed over a rectangular vortex generator, Journal of Thermal Sciences and Engineering Applications: ASME, 061003-1-12 (11) 2019.. [2019-2020]
19. , U. Kashyap, K. Das, B.K. Debnath, U. Kashyap, S.K. Saha, Effect of Secondary Surface on Rectangular Vortex Generator: Numerical and Experimental Study, Journal of Thermal Science and Engineering Applications: ASME, https://doi.org/10.1115/1.4047008, 2020. [2019-2020]
20. , Sanjib Kr. Rajbongshi, Deba Kumar Sarma, A comparative study in prediction of surface roughness & flank wear using artificial neural network & response surface methodology method during hard turning in dry and forced air-cooling condition, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol. 21, Nos. 5/6, Page Nos.- 390-436, 2019. [2019-2020]
21. , Hrishikesh Dutta, Kishore Debnath, Deba Kumar Sarma, A Study of Material Removal and Surface Characteristics in Micro-Electrical Discharge Machining of Carbon Fibre Reinforced Plastics, Polymer Composite, Willey, Vol.40, No.10, Page Nos. 4033-4041, 2019. [2019-2020]
22. , Sanjib Kr. Rajbongshi, Deba Kumar Sarma, Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face, International Journal of Refractory Metals and Hard Materials, Vol.83, Page Nos-1-16, September 2019. [2019-2020]
23. , D. K. Sarma, S. Kr. Rajbongshi, A study in turning of AISI D2 steel with Textured and Non-textured coated carbide tool at the flank face, Materials Today: Proceedings, Elsevier, Vol. 28, Page nos. 574-581, 2020. [2019-2020]
24. , Deba Kumar Sarma, Meinam Annebushan Singh, Machining of thin sections using multi-pass Wire Electrical Discharge Machining process, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.22, No.1, Page Nos. 62-78, 2020. [2019-2020]
25. , S. Roy, B. Das, A. Biswas, B.K. Debnath, Energy and exergy analysis of a concretebased thermal energy storage system. Journal of The Institution of Engineers (India): Series C, 2020, Page Nos.1-13, https://doi.org/10.1007/s40032-020-00564-9.. [2019-2020]
26. , H. Dutta, K. Debnath, D.K. Sarma, Improving the Performance of μED-Milling using Assisting Electrode for Fabricating Micro-Channels in CFRP Composites, Materials Today: Proceedings, Elsevier, Vol. 28, Page nos. 755-760, 2020. [2019-2020]
27. , S. Vishwakarma, S. Roy, B. Das, and B. K. Debnath. Performance analysis of internally helically v-grooved absorber tubes using nanofluid. Thermal Science and Engineering Progress, 2020, Vol. 18 (1), Page Nos. 100538 (1-10), DOI: 10.1016/j.tsep.2020.100538.. [2019-2020]
28. , A.C. Chandekar, B. K. Debnath. Effect of intake manifold design on the mixing of air and bio-CNG in a port-injected dual fuel diesel engine. Journal of Thermal Analysis and Calorimetry, 2020, Page Nos. 1-15. DOI: 10.1007/s10973-020-09591-1.. [2019-2020]
29. , U. Kashyap, K. Das, B. K. Debnath, U. Kashyap, S. K. Saha. Numerical study on effect of secondary surface on rectangular vortex generator. Journal of Thermal Science and Engineering Applications. 2020, Page Nos. 1-33. DOI: https://doi.org/10.1115/1.4047008. [2019-2020]
30. , Khelkar AB, Debnath BK, & Debnath K (2020). Use of sinusoidal surface profile in the absorber tube of a parabolic trough solar collector to enhance its thermal performance. Journal of Thermal Analysis and Calorimetry, DOI: 10.1007/s10973- 020-09929-9.. [2019-2020]
31. , Mazarbhuiya, R.M., Rahang, M. ‘Reverse EDM Process for Pattern Generation using Powder Metallurgical Green Compact Tool’, Materials and Manufacturing Process. (Accepted).. [2019-2020]
32. , S. Deka, P.R. Babu and M. Rahang, 2020. A new method for force prediction in an accelerometer force balance system using support vector regression. Transactions of the Institute of Measurement and Control, 42(4), pp.880-889.. [2019-2020]
33. , M. Rahang and P.K. Patowari, SELECTIVE AREA DEPOSITION FOR PATTERN GENERATION IN EDM USING MASKING TECHNIQUE, Surface Review and Letters, 1950218, 2020, DOI: 10.1142/S0218625X19502184. [2019-2020]
34. , Rashed Mustafa Mazarbhuiya, Hrishikesh Dutta, Kishore Debnath and Maneswar Rahang, Surface modification of CFRP composite using reverse-EDM method, Surfaces and Interfaces 18, 2020, 100457.. [2019-2020]
35. , M. Rahang and P.K. Patowari, Pattern generation by selective area deposition of material in EDM, Materials and Manufacturing Processes, 34(16), 2019, 1847-1854. [2019-2020]
36. , S. Das, B.K. Debnath, R.S. Das, A. Stagni, T. Faravelli. Numerical investigation of a porous media combustor in a small-scale diesel engine. Energy 186, 1-15, 2019.. [2019-2020]
37. , P.J. Bezbaruah, R.S. Das, B.K. Sarkar. Solar air heater with finned absorber plate and helical flow path: A CFD analysis. Applied Solar Energy 56(1), 35-41, 2020.. [2019-2020]
38. , P.J. Bezbaruah, R.S. Das, B.K. Sarkar. Thermal and fluid flow analysis of miller teeth shaped ribbed solar air heater-A CFD approach, Journal of Scientific and Industrial Research 78, 694-698, 2019.. [2019-2020]
39. , P.J. Bezbaruah, R.S. Das, B.K. Sarkar. Overall performance analysis and GRA optimization of solar air heater with truncated half conical vortex generators. Solar Energy 196, 637-652, 2020.. [2019-2020]
40. , . Alom, N., and Saha, U. K., 2019. Drag and lift characteristics of a novel ellipticalbladed Savonius rotor with vent augmenters, ASME Journal of Solar Energy Engineering, Vol. 141, No. 5, p. 051007.. [2019-2020]
41. , S. Roy, T. Bose, K. Debnath, Behaviour of glass fiber-reinforced composite with delamination under Iosipescu shear test, International Journal of Modern Manufacturing Technologies, Vol.-11(2), 119-125, 2019.. [2019-2020]
42. , N. Hanuman, S. Roy, T. Bose, Resonant activation of different intermodulation frequencies using dual excitations, Ultrasonics, Vol.-106, 106138, 2020.. [2019-2020]
43. , N. Hanuman, S. Roy, T. Bose, Detection of local defect resonance intermodulation peaks using bicoherence analysis, International Journal of Mechanical Sciences, Vol.- 163, 105092, 2019.. [2019-2020]
44. , GB Murali, B Deepak, MVA Raju, BB Biswal, Optimal robotic assembly sequence planning using stability graph through stable assembly subset identification, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …. [2019-2020]
45. , A Das, SK Patel, BB Biswal, SR Das, Performance evaluation of aluminium oxide nano particles in cutting fluid with MQL technique in turning of hardened AISI 4340 alloy steel, Scientia Iranica. [2019-2020]
46. , A Das, SK Patel, BB Biswal, SR Das, Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts, Journal of Superhard Materials 41 (4), 247-264. [2019-2020]
47. , GB Mahanta, A Rout, B Deepak, BB Biswal, Application of Meta-Heuristic Optimization Techniques for Design Optimization of a Robotic Gripper, International Journal of Applied Metaheuristic Computing (IJAMC) 10 (3), 107-133. [2019-2020]
48. , BK Khamari, SS Dash, SK Karak, BB Biswal, Effect of welding parameters on mechanical and microstructural properties of GMAW and SMAW mild steel joints, Ironmaking & Steelmaking, 1-8. [2019-2020]
49. , B Deepak, G Bala Murali, MVAR Bahubalendruni, BB Biswal, Assembly sequence planning using soft computing methods: a review, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …. [2019-2020]
50. , S Datta, BB Biswal, Experimental Studies on Electro-Discharge Machining of Inconel 825 Super Alloy using Cryogenically Treated Tool/Workpiece,Measurement, Volume 145, 2019,Page Nos 611-630. [2018-2019]
51. , BBVL Deepak, G. B. Murali, MVA R. Bahubalendruni, B.B. Biswal, Assembly sequence planning using soft computing methods: A review, Proc IMechE Part E: J Process Mechanical Engineering, Page Nos 1–31, 2019. [2018-2019]
52. , A. Das, S. K. Patel, T. K. Hotta, B. B. Biswal, Statistical analysis of different machining characteristics of EN-24 alloy steel during dry hard turning with multilayer coated cermet inserts, Measurement Volume 134, February 2019, Page Nos 123-141. [2018-2019]
53. , Gunji Bala Murali, B. B. V. L. Deepak, Golak Bihari Mahanta, Amruta Rout, B. B. Biswal, Design for Assembly Approach for Energy-Efficient Optimal Assembly Sequence Planning Using Improved Firefly Algorithm Research into Design for a Connected World 2019, Page Nos 665-675.. [2018-2019]
54. , G. B. Mahanta, B. B. V. L. Deepak, M. Dileep, B. B. Biswal, S. K. Pattanayak, Prediction of Inverse Kinematics for a 6-DOF Industrial Robot Arm Using Soft Computing Techniques, Soft Computing for Problem Solving 2018, Page Nos 519-530.. [2018-2019]
55. , G. Bala Murali B. B. V. L. Deepak B. B. Biswal Bijaya Kumar Khamari, Integrated Design for Assembly Approach Using Ant Colony Optimization Algorithm for Optimal Assembly Sequence Planning, 2018, Computational Intelligence in Data Mining pp 249-259|. [2018-2019]
56. , Pradip Kumar Sahu, Gunji Balamurali, Golak Bihari Mahanta,Bibhuti Bhusan Biswal, A Heuristic Comparison of Optimization Algorithms for the Trajectory Planning of a 4-axis SCARA Robot Manipulator, 2018 Computational Intelligence in Data Mining pp 569-582|. [2018-2019]
57. , Balamurali Gunji, B. B. V. L. Deepak, Amruta Rout, Golak Bihari Mohanta, B. B. Biswal, Hybridized Cuckoo–Bat Algorithm for Optimal Assembly Sequence Planning, Soft Computing for Problem Solving, 2019, pp 627-638. [2018-2019]
58. , M. V. A. Raju Bahubalendruni, Bibhuti Bhusan Biswal, An Efficient Stable Subassembly Identification Method Towards Assembly Sequence Generation, National Academy Science Letters, 2018, Volume 41, Issue 6, pp 375–378. [2018-2019]
59. , A. Das, N. Tirkey, S. K. Patel, S. R. Das, B. B. Biswal, A Comparison of Machinability in Hard Turning of EN-24 Alloy Steel Under Mist Cooled and Dry Cutting Environments with a Coated Cermet Tool, Journal of Failure Analysis and Prevention 2019, Volume 19, (1) pp 115–130|. [2018-2019]
60. , C. Upadhyay , Rahul , S. Datta , S. S. Mahapatra , B. B. Biswal An experimental investigation on electro discharge machining of Inconel 601, International Journal of Industrial system and engineering.. [2018-2019]
61. , J. Bezbaruah, R. S. Das, B. K. Sarkar, Thermo-hydraulic performance augmentation of solar air duct using modified forms of conical vortex generators, Heat Mass Transfer, Page Nos 1-17, 2018. https://link.springer.com/article/10.1007/s00231-018-2521-1#citeas. [2018-2019]
62. , B. K. Sarkar, Modeling and Validation of a 2-DOF Parallel Manipulator for Pose Control Application Reference, Robotics and Computer Integrated Manufacturing, Vol.-50, Page Nos -234-241, 2018. http://www.sciencedirect.com/science/article/pii/S0736584516302903. [2018-2019]
63. , D. Sharma, B. K. Debnath, Computational investigation of porous media combustion technology in spark ignition engine, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2019, DOI 10.1007/s40997-019-00285-0.. [2018-2019]
64. , U. Kashyap, K. Das, B. K. Debnath, Numerical and experimental study of the effect of secondary surfaces fixed over a rectangular vortex generator, Journal of Thermal Science and Engineering Applications, 2019, DOI:10.1115/1.4043007.. [2018-2019]
65. , U. Kashyap, K. Das, B. K. Debnath, Effect of surface modification of a rectangular vortex generator on heat transfer rate from a surface to fluid: An extended study, International Journal of Thermal Sciences, Vol.-134, Page Nos -269–281, 2018.. [2018-2019]
66. , U. Kashyap, K. Das, B. K. Debnath, Numerical and Experimental Study of the Effect of Secondary Surfaces Fixed over a Rectangular Vortex Generator, Journal of Thermal Science and Engineering Application, 1948-5085, 2019.. [2018-2019]
67. , Alom, N., and Saha, U. K., 2019. Examining the aerodynamic drag and lift characteristics of a newly developed elliptical- bladed Savonius rotor, ASME Journal of Energy Resources Technology, Vol. 141, No. 5, p. 051201.. [2018-2019]
68. , Alom, N., and Saha, U. K., 2019. Evolution and progress in the development of Savonius wind turbine rotor blade profiles and shapes, ASME Journal of Solar Energy Engineering, Vol. 141, No.3, p. 030801.. [2018-2019]
69. , Ranjan, R. K., Alom, N., Singh, J., and Sarkar, B. K., 2019, “Performance investigation of cross flow hydro turbine with the variation of blade and nozzle entry arc angle” Energy Conversion and Management, Vol. 182, pp.41–50. [2018-2019]
70. , Alom, N., and Saha, U. K., 2019. Influence of blade profiles on Savonius rotor performance: Numerical simulation and experimental validation, Energy Conversion and Management, Vol. 186, pp: 267-277. [2018-2019]
71. , Alom, N., and Saha, U. K., 2019. Drag and lift characteristics of a novel elliptical-bladed Savonius rotor with vent augmenters, ASME Journal of Solar Energy Engineering, Vol. 141, No. 5, p. 051007.. [2018-2019]
72. , M. Roy Choudhury and K. Debnath. Experimental Analysis of Tensile and Compressive Failure Load in Single-Lap Bolted Joint of Green Composites. Composite Structures, Vol. 225, 111180, 2019.. [2018-2019]
73. , S. Kachhap, A. Singh, and K. Debnath. A Study of Material Removal during Electrical-Discharge Drilling of Hybrid Metal Matrix Composites. Journal of Scientific & Industrial Research, Vol. 78(6), pp. 364-367, 2019.. [2018-2019]
74. , H. Dutta, K. Debnath, and D.K. Sarma. A Study of Material Removal and Surface Characteristics in Micro-electrical Discharge Machining of Carbon Fiber-Reinforced Plastics. Polymer Composites, 2019. (DOI: 10.1002/pc.25264). [2018-2019]
75. , K. Debnath, V. Dhawan, I. Singh, and T.S. Srivatsan. Wear and Frictional Behaviour of Composites Filled with Agro-Based Waste Materials. Emerging Materials Research, Vol. 8(1), pp. 84-93, 2019.. [2018-2019]
76. , M. Roy Choudhury, M.S. Srinivas, and K. Debnath. Experimental Investigations on Drilling of Lignocellulosic Fiber Reinforced Composite Laminates. Journal of Manufacturing Processes, Vol.34, pp. 51-61, 2018.. [2018-2019]
77. , S. Kachhap, A. Singh, and K. Debnath. Electric Discharge Drilling of Hybrid Metal Matrix Composites using Different Tool Electrodes. Journal of Scientific & Industrial Research, Vol. 77(6), pp. 325-329, 2018.. [2018-2019]
78. , S. Roy, T. Bose, and K. Debnath. Detection of Local Defect Resonance Frequencies using Bicoherence Analysis. Journal of Sound and Vibration, Vol. 443, pp. 703-716, 2019.. [2018-2019]
79. , S. Roy, T. Bose. Efficient determination of local defect resonance frequencies from bicoherence plots using double excitations. Mechanical Systems and Signal Processing 127, 595-609.. [2018-2019]
80. , Deba Kumar Sarma, Meinam Annebushan Singh, Machining of thin sections using multi-pass Wire Electrical Discharge Machining process, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Accepted, (In press), 2019.. [2018-2019]
81. , M. A. Singh, Sanjib Kr. Rajbongshi, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface and porous recast layer analysis in μ-EDM of MWCNT-Al2O3 composites, Materials and Manufacturing Processes, Taylor & Francis, Vol.34, No.5, Page Nos.567-579, 2019. [2018-2019]
82. , Sanjib Kr. Rajbongshi, Meinam annebushan Singh, Deba Kumar Sarma, A comparative study in machining of AISI D2 steel using textured and non-textured coated carbide tool at the flank face, Journal of Manufacturing Processes, Elsevier, Vol.-36, Page Nos- 360-372, 2018. [2018-2019]
83. , Sanjib Kr. Rajbongshi, Deba Kumar Sarma, A comparative study in prediction of surface roughness & flank wear using artificial neural network & response surface methodology method during hard turning in dry and forced air-cooling condition, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.-Accepted, (In press), 2018. [2018-2019]
84. , M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface Characterstics and Erosion Phenomena in WEDM of Alumina Composites, Materials and Manufacturing Processes, Taylor & Francis, Vol.-33, Issue No.16, Page Nos- 1815-1821, 2018.. [2018-2019]
85. , M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface Characterstics Enhancement of MWCNT alumina composites in Multi Pass WEDM process, Journal of the European Ceramic Society, Elsevier, Vol.-38(11), Page Nos -4035-4042, 2018.. [2018-2019]
86. , M. A. Singh, K. Das, D. K. Sarma, Thermal Simulation of Machining of Alumina with Wire Electrical Discharge Machining Process using Assisting Electrode, Journal of Mechanical Science and Technology, Springer, Vol.-32(1), Page Nos -333-343, 2018.. [2018-2019]
87. , M.A. Singh, D.K. Sarma, Parametric and Subsurface Analysis of MWCNT Alumina Composites in WEDM Process, Ceramics International, Elsevier, Vol.-44(2), Page Nos -2186-2197, 2018.. [2018-2019]
88. , S. Mohapatra,R .N. Mahapatra, B. B.Biswal, ,B. Balabantray, A. K. Behera, A Deterministic Model for Remanufacturing Inventory for Reverse Supply Chain International Journal of Engineering & Technology 7, Page Nos 207-210, 2018. [2018-2019]
89. , B K Balabantaray, R N Mahapatra and B B Biswal, “ Efficient Part Recognition Method in Vision Guided Robots using Orthogonal Moments, International Journal of Engineering &Technology, 7(4.41) (2018) 60-65, 2018, DOI: 10.14419/ijet.v7i4.41.24301.. [2018-2019]
90. , Pradip K. Sahu, B. M. Gunji, G. B. Mahanta and B. B. Biswal. “A Heuristic Comparison of Optimization Algorithms for the Trajectory Planning of a 4-axis SCARA Robot Manipulator”, Special Issue on Computational Intelligence for Data Analytics 2018, Springer International Journal of Data Science and Analytics.. [2017-2018]
91. , Amruta Rout, B. B. Deepak, B. B. Biswal, G. B. Mahanta, and B. M. Gunji, “An Optimal Image Processing Method for Simultaneous Detection of Weld Seam Position and Weld Gap in Robotic Arc Welding.” International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME) 8, no. 1 (2018): 37-53.. [2017-2018]
92. , B. M. Gunji, B.B. Deepak, MR. Bahubalendruni and B.B. Biswal, “An Optimal Robotic Assembly Sequence Planning by Assembly Subsets Detection Method Using Teaching Learning Based Optimization Algorithm”. IEEE Transactions on Automation Science and Engineering.. [2017-2018]
93. , Rahul, Saurav Datta, Manoj Masanta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Analysis on Surface Characteristics of Electro-Discharge Machined Inconel 718, Int. J. Materials and Product Technology, Vol. 56, Nos. 1/2, pp.135-168 2018. [2017-2018]
94. , B. Panda, M. Leite, B. B. Biswal, X. Niu, and A. Garg, (2018), “Experimental and numerical modelling of mechanical properties of 3D printed honeycomb structures. Measurement, 116, 495-506.SCI Index. [2017-2018]
95. , B. B. Deepak, B.M.Gunji, MR. Bahubalendruni and B. B. Biswal, (2018), “Assembly sequence planning using soft computing methods: A review”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering : 0954408918764459.. [2017-2018]
96. , B. M. Gunji, B. B. Deepak and B.B. Biswal, (2017), A Novel Design for Assembly Approach for Modified Topology of Industrial Products. International Journal of Performability Engineering. 2017 Nov;13(7):1013.. [2017-2018]
97. , Rahul, Saurav Datta, Bibhuti Bhusan Biswal, SibaSankarMahapatra, Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: Emphasis on surface integrity and metallurgical characteristics, Journal of Manufacturing Processes, Vol. 26, pp. 188-202, 04, 2017. [2017-2018]
98. , Rahul, Saurav Datta, Manoj Masanta, Bibhuti Bhusan Biswal, SibaSankarMahapatra, A Novel Satisfaction Function and Distance-Based Approach for Machining Performance Optimization during Electro-Discharge Machining on Super Alloy Inconel 718, Arabian Journal for Science and Engineering, Vol.42. No 5, pp.1999-2020, 02, 2017.. [2017-2018]
99. , Rahul, Kumar Abhishek, Saurav Datta, Bibhuti Bhusan Biswal, SibaSankarMahapatra, Machining Performance Optimization during EDM of Inconel 718: A Case Experimental Investigation, International Journal of Productivity and Quality Management, Vol. 21, No. 4, pp. 460-489, 06, 2017. [2017-2018]
100. , B. M. Gunji, B. B. Deepak, M R. Bahubalendruni and B. B. Biswal, (2017). Hybridized genetic-immune based strategy to obtain optimal feasible assembly sequences. International Journal of Industrial Engineering Computations. 2017; 8(3):333- 46.. [2017-2018]
101. , B. N. Panda, MR. Bahubalendruni, B. B. Biswal and M. Leite, (2017), “A CAD-based approach for measuring volumetric error in layered manufacturing.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231.13 (2017): 2398-2406.. [2017-2018]
102. , MR. Bahubalendruni and B. B. Biswal, (2017), A novel concatenation method for generating optimal robotic assembly sequences. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, no. 10 (2017): 1966-1977.. [2017-2018]
103. , Asita Kumar Rath, Dayal R. Parhi, Harish Chandra Das, Manoj Kumar Muni, Priyadarshi Biplab Kumar , Analysis and use of fuzzy intelligent technique for navigation of humanoid robot in obstacle prone zone, Defence Technology, 1-6, 2018. [2017-2018]
104. , Asita Kumar Rath, Harish Chandra Das, DayalR.Parhi, Priyadarshi Biplab Kumar , Application of artificial neural network for control and navigation of humanoid robot, Journal of Mechanical Engineering and Sciences, 12, 3529-3538, 2018. [2017-2018]
105. , Asita Kumar Rath, Dayal R.Parhi, Harish Chandra Das, Priyadarshi Biplab Kumar , Behaviour based navigational control of humanoid robot using genetic algorithm technique in cluttered environment, Modelling, Measurement and Control B, 91, 32- 36, 2018. [2017-2018]
106. , Numerical, Experimental and Fuzzy Logic Applications for Investigation of Crack Location and Crack Depth Estimation in a Free-Free Aluminum Beam, Sanjay K. Behera, DayalR.Parhi, Harish Chandra Das , Vibrations in Physical Systems, 29, 1-20, 2018. [2017-2018]
107. , Sanjay K. Behera, DayalR.Parhi, Harish Chandra Das , Approach to establish a Hybrid Intelligent Model for Crack Diagnosis in a Fix-Hinge Beam Structure , International Journal of Structural Integrity, accepted, 2018. [2017-2018]
108. , Binayak Pattanayak, Siba Shankar Mohapatra, Harish Chandra Das, Mathematical Modelling for Low Temperature Batch Drying of Paddy using Fluidized Bed Technology, International Journal of Mathematical Modelling and Numerical Optimisation, 2018. [2017-2018]
109. , Shakti P. Jena, Saroj K. Acharya, Harish C. Das, Pragyan P. Patnaik , Investigation of the effect of FeCl3 on combustion and emission of diesel engine with thermal barriercoating., Sustainable Environment Research, 28, 72-76, 2018. [2017-2018]
110. , Pruthiviraj Nemalipuri, Dr. Malay Kumar Pradhan, Dr. Harish Chandra Das, Dr. Rabindra Narayan Mahapatra, Barsha Das , Prediction of Air pollutants Emitting from Chimney of a CHP using CFD, 9, 105-110, 2018. [2017-2018]
111. , Pragyan P Patnaik, Shakti P Jena, Saroj K Acharya, Harish C Das, Effect of FeCl3 and diethyl ether as additives on compression ignition engine emissions, Sustainable Environment Research , 27, 154-161,2017. [2017-2018]
112. , Saroj Kumar Padhi,Ranjeet Kumar Sahu, S. S. Mahapatra, Harish Chandra Das, Anoop Kumar Sood, Brundaban Patro,A. K. Mondal , Optimization of fused deposition modelling process parameters using a fuzzy inference system coupled with Taguchi philosophy, International Journal of Advance Manufacturing, 5, 231-242, 2017. [2017-2018]
113. , Saroj Kumar Padhi, S.S. Mahappatra and Harish Chandra Das , Performance of a Copper electroplated plastic electrical discharge machining electrode compared to a Copper electrode, International Journal of Pure and applied Mathematics, 114, 459-469, 2017.. [2017-2018]
114. , Sanjay K. Behera1, Dayal R. Parhi, Harish C. Das , A hybrid intelligent model for crack diagnosis in a free-free aluminium beam structure, Modelling, Measurement and Control B, 87, 2, 2018.. [2017-2018]
115. , Application of genetic algorithm for crack diagnosis of a free-free aluminum beam with transverse crack subjected to axial and bending load, Sanjay K. Behera1, Dayal R. Parhi, Harish C. Das, , 2018. [2017-2018]
116. , B. K. Sarkar, Modeling and Validation of a 2-DOF Parallel Manipulator for Pose Control Application Reference, Robotics and Computer Integrated Manufacturing, Vol.-50, Page No:-234-241, 2018.. [2017-2018]
117. , M. A. Singh, K. Das, D. K. Sarma, Thermal simulation of machining of alumina with wire electrical discharge machining process using assisting electrode, Journal of Mechanical Science and Technology, 32, 1, Page No:333-343, 2018.. [2017-2018]
118. , M.A. Singh, D.K. Sarma, Parametric and Subsurface Analysis of MWCNT Alumina Composites in WEDM Process, Ceramics International, Elsevier, Vol.-44, Page No:2186-2197, 2018.. [2017-2018]
119. , M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedláek, P. Šajgalík, Machinability analysis of multi walled carbon nanotubes filled alumina composites in Wire Electrical Discharge Machining process, Journal of the European Ceramic Society, Elsevier, Vol.- 37, Page No:3107-3114, 2017.. [2017-2018]
120. , U. Kashyap, K. Das, B. K. Debnath, Effect of surface modification of a rectangular vortex generator on heat transfer rate from a surface to fluid, International Journal of Thermal Sciences, 127, Page No:61-78, 2018.. [2017-2018]
121. , P. Ramesh, S. R. Nanda, V. Kulkarni and S. K. Dwivedy, Soft Computing Based Force Recovery Technique for Hypersonic Shock Tunnel Tests, International Journal of Structural Stability and Dynamics, 18(05), 1871004, 2018.. [2017-2018]
122. , P. Ramesh, S. R. Nanda, V. Kulkarni and S. K. Dwivedy, Application of neural-networks and neuro-fuzzy systems for the prediction of short-duration forces acting on the blunt bodies, Soft Computing, Pg:1-14, 2018.. [2017-2018]
123. , N. Alom and U.K. Saha, Four decades of research into the augmentation techniques of Savonius wind turbine rotor, ASME Journal of Energy Resources Technology, Vol. 140, No. 5, pp: 050801-1-050801-14, 2018.. [2017-2018]
124. , N. Alom and U.K. Saha, Performance evaluation of vent-augmented elliptical-bladed Savonius rotors by numerical simulation and wind tunnel experiments, Energy, Vol. 152, Page No: 277 -290, 2018.. [2017-2018]
125. , A.C. Chandekar, B.K. Debnath, Computational investigation of air-biogas mixing device for different biogas substitutions and engine load variations, Renewable Energy, 127, 811-824, 2018.. [2017-2018]
126. , H. C. Das, Investigation of the effect of FeCl3 on combustion and emission of diesel engine with thermal barrier coating,, Sustainable Environment Research, Vol.-28, Issue No.-2, Page No: -72-78, 2018.. [2017-2018]
127. , H. C. Das, Effect of FeCl3 and diethyl ether as additives on compression ignition engine emissions, Sustainable Environment Research, Vol.-27, Issue No.-3, Page No: 154-161, 2017.. [2017-2018]
128. , J. P. Panda, H. V. Warrior, S. Maity, A. Mitra, K. Sasmal, An improved model including length scale anisotropy for the pressure strain correlation of turbulence, Journal of Fluids Engineering, Vol.139, Issue No.4, Page No: 044503-1 to 6, 2017.. [2017-2018]
129. , T. Bose, A. R. Mohanty, Large amplitude axisymmetric vibration of a circular plate having a circumferential crack, Journal of Mechanical Sciences, Vol.124, Page No: 194–202, 2017.. [2017-2018]
130. , J. P. Panda, H. V. Warrior, S. Maity, A. Mitra, K. Sasmal, An improved model including length scale anisotropy for the pressure strain correlation of turbulence, Journal of Fluids Engineering, Vol.-139, Issue No.-4, Page Nos -044503-1 to 6, 2017.. [2016-2017]
131. , M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedláek, P. Šajgalík, Machinability analysis of multi walled carbon nanotubes filled alumina composites in Wire Electrical Discharge Machining process, Journal of the European Ceramic Society, Elsevier, Vol.-37, Page Nos -3107-3114, 2017.. [2016-2017]
132. , C. Marthong, D.K. Sarma, Influence of PET fiber geometry on the mechanical properties of concrete: an experimental investigation, European Journal of Environment and Civil Engineering, Taylor and Francis, Vol.-20, Issue No.-7, Page Nos -771-784, 2016.. [2016-2017]
133. , C. Marthong, D.K. Sarma, Flexural behavior of ferrocement plates incorporating steel and PET fibers, Materials and Construction Technologies for Sustainable Development, Key Engineering Materials, Trans Tech Publication, Vol.-666, Page Nos -97-106, 2016.. [2016-2017]
134. , R. Kalidasan, M.Yatin, D.K.Sarma, S.Senthilvelan, U.S. Dixit, An experimental study of cutting forces and temperature in multi-tool turning in grey cast iron, International Journal of Machining and Machinability of Materials,Inderscience, Vol.-18, Issue No.-5/6, Page Nos -540-541, 2016.. [2016-2017]
135. , R. S. Das, S. Jain, Experimental investigations on a solar assisted liquid desiccant cooling system with indirect contact dehumidifier, Solar Energy, Vol.-153, Page Nos -289-300, 2017. [2016-2017]
136. , K. Debnath, I. Singh, and A. Dvivedi, On the Analysis of Force During Secondary Processing of Natural Fiber Reinforced Composite Laminates,Polymer Composites, Vol.-38, Issue No.-1, Page Nos -164-174, 2017.. [2016-2017]
137. , P.K. Bajpai, K. Debnath, and I. Singh, Hole Making in Natural Fiber-Reinforced Polylactic Acid Laminates: An Experimental Investigation, Journal of Thermoplastic Composite Materials, Vol.-30, Issue No.-1, Page Nos -30-46, 2017.. [2016-2017]
138. , K. Debnath and I. Singh, Low-Frequency Modulation-Assisted Drilling of Carbon-Epoxy Composite Laminate, Journal of Manufacturing Processes, Vol.-25, Page Nos -262-273, 2017.. [2016-2017]
139. , V. Dhawan, K. Debnath, I. Singh, and S. Singh, A Novel Intelligent Software-based Approach to Predict Forces and Delamination during Drilling of Fiber-Reinforced Plastics, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol.-230, Issue No.-2, Page Nos -603-614, 2016.. [2016-2017]
140. , K. Debnath, A. Sisodia, A. Kumar, and I. Singh, Damage-Free Hole Making in Fiber-Reinforced Composites: An Innovative Tool Design Approach,Materials and Manufacturing Processes, Vol.-31, Issue No.-10, Page Nos -1400-1408, 2016.. [2016-2017]
141. , V. Dhawan, K. Debnath, I. Singh, and S. Singh, Prediction of Forces during Drilling of Composite Laminates Using Artificial Neural Network: A New Approach, FME-Transactions, Vol.-44, Issue No.-1, Page Nos -36-42, 2016.. [2016-2017]
142. , A.V. Singhal, K. Debnath, I. Singh, and B.S.S. Daniel, Critical Parameters Affecting Mechanical Behavior of Natural Fiber Reinforced Plastics,Journal of Natural Fibers, Vol.-13, Issue No.-6, Page Nos -640-650, 2016.. [2016-2017]
143. , K. Debnath, I. Singh, and T.S. Srivatsan, An Innovative Tool for Engineering Good Quality Holes in Composite Laminates, Materials and Manufacturing Processes, 2016.. [2016-2017]
144. , M. Rahang, P. K. Patowari, Parametric Optimization for Selective Surface Modification in EDM using Taguchi Analysis, Materials and Manufacturing Processes, Vol.-31, Issue No.-4, Page Nos -422-431, 2016.. [2016-2017]
145. , T. Bose, A. R. Mohanty, Large amplitude axisymmetric vibration of a circular plate having a circumferential crack, Journal of Mechanical Sciences, Vol.-124, Page Nos -194–202, 2017.. [2016-2017]
146. , T. Bose, A. R. Mohanty, Detection and monitoring of side crack in a rectangular plate using mobility, Journal of Vibration and Control, Vol.-22, Issue No.-2, Page Nos -585-594, 2016.. [2016-2017]
147. , C. Marthong, D. K. Sarma, Influence of PET fiber geometry on the mechanical properties of concrete: an experimental investigation, European Journal of Environment and Civil Engineering, Taylor and Francis, Vol.-20, Issue No.-7, Page No. 771-784, 2016.. [2015-2016]
148. , C. Marthong, D. K. Sarma, Flexural behavior of ferrocement plates incorporating steel and PET fibers, Materials and Construction Technologies for Sustainable Development, Key Engineering Materials, Trans Tech Publication, Vol.-666, Page No. 97-106, 2016.. [2015-2016]
149. , R. Kalidasan, M. Yatin, D. K. Sarma, U.S. Dixit, S. Senthilvelan, Preliminary Experimental Investigation on Multi-Tool Turning Process, International Journal of Machining and Machinability of Materials, Inderscience, Vol.-Accepted, 2016.. [2015-2016]
150. , K. Sasmal, S. Maity, H. Warrior, Modeling of turbulent dissipation and its validation in periodically stratified region in the Liverpool Bay and in the North Sea, Ocean Dynamics, Vol.-65, Issue No.-7, PageNos -969-988, 2015.. [2015-2016]
151. , K. Sasmal, SR Bonthu, S. Maity, H. Warrior, Effect of Atmospheric Forcing on Plume Dispersion and Study of Nuclear Effluent Trajectories for the Kalpakkam Coast, India, Journal of Hazardous, Toxic and Radioactive Waste, ASCE, Vol.-19, Issue No.-3, Page Nos -04014035-1 to 16, 2015.. [2015-2016]
152. , P. Mandal, B. K. Sarkar, R. Saha, S. Mookherjee, D. Sanyal, Designing an optimized model-free controller for improved motion tracking by rugged electrohydraulic system, ProcIMechE Part I: J Systems and Control Engineering, Vol.-230, Issue No.-5, Page Nos -385-396, 2016.. [2015-2016]
153. , S. Dasmahapatra, B. K. Sarkar, R. Saha, A. Chatterjee, S. Mookherjee, D. Sanyal, Design of an Adaptive-Fuzzy-Bias-SMC and Validation for a Rugged Electrohydraulic System, IEEE/ASME Transaction on Mechatronics, Vol.-20, Issue No.-6, Page Nos -2708-2715, 2015.. [2015-2016]
154. , P. Mandal, B. K. Sarkar, R. Saha, A. Chatterjee, S. Mookherjee, D. Sanyal, Real-time fuzzy-feedforward controller design by bacterial foraging optimization for an electrohydraulic system, Engineering Applications of Artificial Intelligence, Vol.- 45, Page Nos -168-179, 2015.. [2015-2016]
155. , B. B. Ghosh, B. K. Sarkar, R. Saha, Realtime performance analysis of different combinations of fuzzy–PID and bias controllers for a two degree of freedom electrohydraulic parallel manipulator, Robotics and Computer-integrated manufacturing, Vol.-34, Page Nos -62-69, 2015.. [2015-2016]
156. , P. Mandal, B. K. Sarkar, R. Saha, S. Mookherjee, S. K. Acharya, D. Sanyal, GA-Optimized Fuzzy-Feedforward Motion Tracking Control by a Rugged Electrohydraulic System, IEEE/ASME Transaction on Mechatronics, Vol.-20, Issue No.-4, Page Nos -1734-1742, 2015.. [2015-2016]
157. , F. Millo, B. K. Debnath, T. Vlachos, C. Ciaravino, L. Postrioti, and G. Buitoni, Effects of different biofuels blends on performance and emissions of an automotive diesel engine, Fuel, Vol.-159, Page Nos -614-627, 2015.. [2015-2016]
158. , B. K. Debnath, U.K. Saha, and N. Sahoo, A comprehensive review on the application of emulsions an alternative fuel for diesel engines, Renewable and Sustainable Energy Reviews, Vol.-42, Page Nos -196–211, 2015.. [2015-2016]
159. , R. Singh, K. Das, S. C. Mishra, J. Okajima, S. Maruyama, Minimizing skin thermal damage using surface cooling during laser induced thermal therapy – a numerical study, ASME: Journal of Thermal Science and Engineering Applications, Vol.- 8, Page Nos -011002-1-6, 2015.. [2015-2016]
160. , R. Singh, K. Das, J. Okajima, S. Maruyama, S.C. Mishra, Modelling skin cooling using optical windows and cryogens during laser induced hyperthermia in a multilayer vascularized tissue, Applied Thermal engineering, Vol.-89, Page Nos -28-35, 2015.. [2015-2016]
161. , K. Debnath, A. Sisodia, A. Kumar, and I. Singh, Damage-Free Hole Making in Fiber-Reinforced Composites: An Innovative Tool Design Approach, Materials and Manufacturing Processes, Vol.-31, Issue No.-10, Page No. 1400-1408, 2016.. [2015-2016]
162. , A. V. Singhal, K. Debnath, I. Singh, and B.S.S. Daniel, Critical Parameters Affecting Mechanical Behavior of Natural Fiber Reinforced Plastics, Journal of Natural Fibers, 2016.. [2015-2016]
163. , K. Debnath, I. Singh, and A. Dvivedi, On the Analysis of Force During Secondary Processing of Natural Fiber Reinforced Composite Laminates, Polymer Composites, 2016.. [2015-2016]
164. , P. K. Bajpai, K. Debnath, and I. Singh, Hole Making in Natural Fiber-Reinforced Polylactic Acid Laminates: An Experimental Investigation, Journal of Thermoplastic Composite Materials, 2016.. [2015-2016]
165. , V. Dhawan, K. Debnath, I. Singh, and S. Singh, Prediction of Forces during Drilling of Composite Laminates Using Artificial Neural Network: A New Approach, FME-Transactions, Vol. 44, Issue No.-1, Page No. 36-42, 2016.. [2015-2016]
166. , V. Dhawan, K. Debnath, I. Singh, and S. Singh, A Novel Intelligent Software-based Approach to Predict Forces and Delamination during Drilling of Fiber-Reinforced Plastics, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol.-230, Issue No.-2, Page No. 603-614, 2016.. [2015-2016]
167. , V. K. Doomra, K. Debnath, and I. Singh, Drilling of Metal Matrix Composites: Experimental and Finite Element Analysis, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.-229, Issue No.-5, Page No. 886-890, 2015.. [2015-2016]
168. , K. Debnath, I. Singh, and A. Dvivedi, Rotary Mode Ultrasonic Drilling of Glass Fiber-Reinforced Epoxy Laminates, Journal of Composite Materials, Vol.-49, Issue No.-8, Page No. 949-963, 2015.. [2015-2016]