Loading...
Loading...
1. , Umesh, R., Kumar S., and Sharma, H. “Finite element analysis of hybrid composite materials under the ballistic impact” Second ASCE conference on CRSIDE 2020 (Accepted). [2019-2020]
2. , Umesh, R., Kumar S., and Sharma, H. “Progress and Evolution in Fatigue studies of Advanced Composite Materials” Second ASCE conference on CRSIDE 2020 (Accepted). [2019-2020]
3. , Umesh, R., Kumar S., and Sharma, H. “Blast Induced Brain Traumatic Injury: Current progress and challenges” 6th national symposium on shock waves 2020, IIT Madras, (Accepted). [2019-2020]
4. , Kaushik, S., Bairagi, S., Siddagangaiah, A.K.;“Moisture susceptibility assessment of cement and RBI-81 stabilized soils”,2nd ASCE conference in India on Challenges of Resilient and Sustainable Infrastructure Development in Emerging Economies, Novotel Kolkata Hotel and Residences, Kolkata, India, March 02 - 04, 2020.. [2019-2020]
5. , Kaushik, S., Prodhani,S.I., Siddagangaiah, A.K.“Characterization of a clayey soil using the cyclic CBR test”,2nd ASCE conference in India on Challenges of Resilient and Sustainable Infrastructure Development in Emerging Economies, Novotel Kolkata Hotel and Residences, Kolkata, India, March 02 - 04, 2020.. [2019-2020]
6. , Jaswanth G., Kumar S., Kumar A., and Sharma H., “Numerical technique for prestressing post-tensioning members subjected to missile impact load,” Proceedings of ICCMS 2019, IIT Mandi, India. [2019-2020]
7. , Chakraborty R, Dey Arindam, “Effect of Spatial Variation of Soil on Probabilistic Slope Stability Analysis for Cut Slopes”, In proceedings of International Conference on Landslide and Slope Stabilty (SLOPE 2019), Bali, Indonesia, 2019.. [2019-2020]
8. , J Sharailin Gidon and Smrutirekha Sahoo (2019). “Stability of slope during rainfall: A finite element approach.” Seventh Indian Young Geotechnical Engineers Conference, Silchar, India, March 15-16, 209-214.. [2019-2020]
9. , Kruthi Kiran Ramagiri, Darshan Chauhan, Shashank Gupta, ArkamitraKar, Dibyendu Adak, EvaluationofStructural Performance of Concrete with Ambient Cured Alkali-Activated Binders, SECON 2019: Proceedingsof SECON'19 pp 1-10.. [2019-2020]
10. , Dr. Ganesh Ch Dhal, RAEEHS -2019, Siksha 'O' Anusandhan Deemedto be University Bhubaneswar-751030, Odisha, India. [2019-2020]
11. , C. Marthong, D Sutnga, O Kharshandi, I J Khryiemmujat and A Shangpliang (2019). Mechanical Strength of Galvanized Steel Wire Mesh (GSWM) as a Strengthening Material of Short RC Column, 4th International Conference on Mechanical and Aeronautical Engineering , IOP Conf. Series: Materials Science and Engineering , 491, doi:10.1088/1757-899X/491/1/012014.. [2018-2019]
12. , J Sharailin Gidon and Smrutirekha Sahoo (2019). “Stability of slope during rainfall: A finite element approach.” Seventh Indian Young Geotechnical Engineers Conference, Chennai, India, March 15-16, 209-214.. [2018-2019]
13. , D. Dutta, H. M. Kalita, Performances of Straight head and T-head groynes as river training structures, 4th International Conference on Mechanical and Aeronautical Engineering, Period -13-16 December, Place -Bangkok, Page -6, 2018.. [2018-2019]
14. , Sahoo, S.,Manna, B. andSharma, K. G. (2018). “Seismic responseof a steep nailed soil slope: Shaking table test and numerical studies.”International Symposium on Geotechnics of Transportation Infrastructure (ISGTI 2018), IIT Delhi, India, April 07-08. [2018-2019]
15. , Chakraborty, R. and Dey, A. (2018). Influence of Toe Cutting on Seismic Response of a Typical Hill-Slope in North East India. 16th ARC, Taipei, Taiwan. (Abstract Accepted). [2017-2018]
16. , Chakraborty, R. and Dey, A. (2018) .Stochastic Modelling of the Spatial Variability of Soil. GeoMEast2018, Cairo, Egypt. (Accepted).. [2017-2018]
17. , Chakraborty R., Dey A. (2018). A Comparison of 1D and 2D Spatial Variability in Probabilistic Slope Stability Analysis. International Symposium of Geotechnics for Transportation Infrastructure, Delhi. Pp. 336-341.. [2017-2018]
18. , H. M. Kalita, A. K. Sarma, C. Marthong, D. K. Sarma, A few simple CFD models for flow simulation around groyne, 2nd International Conference on Design, Mechanical and Material Engineering, 14-16 September, Melbourne, Page Nos 1-6, 2017.. [2017-2018]
19. , Chakraborty R., Dey A. (2017). Importance of Spatial Variability on Probabilistic Slope Stability. Indian Geotechnical Conference, Guwahati.. [2017-2018]
20. , H. M. Kalita, A semi implicit finite difference model for dam break flow simulation over complex river bed, National Conference on Hydrology and Watershed Management (NCHWM-2017), Period -24-25 March, Place -NIT Silchar, 2017 .. [2017-2018]
21. , Susmita Sharma, Pankaj Pathak(2017) “Categorization of Biosolids, A Vital Biological Resource for Sustainable Agriculture” Paris France May 18-19, 2017, 19 (5) Part XII. 19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.. [2017-2018]
22. , Pankaj Pathak, Susmita Sharma (2017) “Study of Strontium Sorption onto Indian Bentonite” Paris France May 18-19, 2017, 19 (5) Part XII.19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.. [2017-2018]
23. , Jaswanth G., Kumar S., and Sharma H., “Impact testing Facility: BHISM for Performance based Blast Resistant Design of Reinforced Concrete (RC) Structures”, Procedia Engineering, 173, pp563 – 569, 2017.. [2017-2018]
24. , S.Sharma, P. Pathak, Categorization of Biosolids, A Vital Biological Resource for Sustainable Agriculture, 19th International Conference on Civil and Environmental Engineering, Period -18-19 May, Place -Paris, France, 2017. 8. [2017-2018]
25. , P. Pathak, S. Sharma, Study of Strontium Sorption onto Indian Bentonite, 19th International Conference on Civil and Environmental Engineering, Period -18-19 May, Place -Paris, France, 2017.. [2017-2018]
26. , Comingstarful Marthong, Deba Kumar Sarma & Hriday Mani Kalita (2017), “Effect of aspect ratio and volume fraction of PET fiber on the mechanical properties of PFRC,” 2nd International Conference on Design, Mechanical and Material Engineering, Swinburne Melbourne, 14th-16th Sept. 2017. [2017-2018]
27. , Saroj Mandal, Dibyendu Adak, Anti-microbial efficiency of nano silver-silica modified geopolymer mortar. CONSEC 2016, Politecnico di Milano, Lecco, Lake Como, Italy. 2 (2017) 49-54.. [2017-2018]
28. , H. M. Kalita, A. K. Sarma, Numerical simulation of open channel flow over undulated and dry bed, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Period -15-17 December, Place -MNNIT Allahabad, 2016.. [2016-2017]
29. , H. M. Kalita, A semi implicit finite difference model for dam break flow simulation over complex river bed, National Conference on Hydrology and Watershed Management (NCHWM-2017), Period -24-25 March, Place -NIT Silchar, 2017.. [2016-2017]
30. , Sahoo, S., Manna, B. and Sharma, K. G. (2016). “Seismicstabilityanalysis of Un-reinforced and reinforcedsoilslopes.” Geo China, Shandong, China, July 25-27.. [2016-2017]
31. , Sahoo, S., Manna, B. and Sharma, K. G. (2016). “Seismic stability analysis of a steep soil slope: with and without nailing.” 6thInternational Conference on Recent Advances in Geotechnical Earthquake Engineering & Soil Dynamics 2016, IIT RoorkeeGreaterNoida campus, GreaterNoida (NCR) India, August 1-6.. [2016-2017]
32. , Susmita Sharma, Pankaj Pathak (2017) “Categorization of Biosolids, A Vital Biological Resource for Sustainable Agriculture” Paris France May 18-19, 2017, 19 (5) Part XII. 19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.. [2016-2017]
33. , Pankaj Pathak, Susmita Sharma (2017) “Study of Strontium Sorption onto Indian Bentonite” Paris France May 18-19, 2017, 19 (5) Part XII.19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.. [2016-2017]
34. , Jaswanth G., Kumar S., and Sharma H., “Impact testing Facility: BHISM for Performance based Blast Resistant Design of Reinforced Concrete (RC) Structures”, Procedia Engineering, 173, pp563 – 569, 2017.. [2016-2017]
35. , Chakraborty, R. and Dey, A. (2016) “Effect of toe cutting on hillslope stability” Geotechnology Towards Global Standards, Indian Geotechnical Conference, IGC 2016 Department of Civil Engineering, IIT Madras, India, pp. 4-1.. [2016-2017]
36. , Chakraborty, R. and Dey, A. (2016) “Stability of hill-slope using LE and FE analyses” National Conference on Engineering Problems and Application of Mathematics: EPAM 2016 , NIT Agartala, Tripura, India, pp. 5-1.. [2016-2017]
37. , Chakraborty, R. and Dey, A. (2016) “Multiple nonlinear regression analysis for slope stability using limit equilibrium method” International Geotechnical Engineering Conference on Sustainability in Geotechnical Engineering Practices and Related Urban Issues, Mumbai, India, pp. 1-3.. [2016-2017]
38. , Chakraborty, R. and Dey, A. (2016) “Multiple nonlinear regression analysis for slope stability using limit equilibrium method” International Geotechnical Engineering Conference on Sustainability in Geotechnical Engineering Practices and Related Urban Issues, Mumbai, India, pp. 1-3.. [2016-2017]
39. , Chakraborty R. and Dey A. (2016) “Numerical investigation of slope instability induced by hydraulic and seismic actions” North-East Students Geo-Congress: NESGC 2016, Agartala, India, pp. 237-244.. [2016-2017]
40. , Kalita, H. M. (2015), “A comparative study of two different downstream boundary conditions in modelling river flow”, CD proceedings of International Conference on Sustainable Technologies in Building & Environment, Chennai on 15-17 July 2015.. [2015-2016]
1. , Hopeful Syiemiong and Comingstarful Marthong (2020). “Effect of mortar grade on the uniaxial compression strength of low-strength hollow concrete block masonry prisms" Material Today: Proceedings, 28 (2020) 842–845.. [2019-2020]
2. , KH Lepcha, AL Marbaniang, ML Patton, A Khyriemmujat, Behaviour and Design of Lean Duplex Stainless Steel (LDSS) Beams with Web Openings Under Pure Bending, International Journal of Steel Structures, Springer, Vol.-17, 1052–1068, 20.. [2019-2020]
3. , K. Bora, H. M. Kalita, A semi-coupled model for morphological flow simulation in river bend, Journal of Applied Fluid Mechanics, Vol.- 13, Issue No.- 5, Page No1611-1622, 2020. [2019-2020]
4. , H. M. Kalita, A simple and efficient numerical model for simulatingone dimensional dam break flows, International Journal of Hydrology Science and Technology, Vol.- 10, Issue No.- 1, Page No- 1-16, 2020.. [2019-2020]
5. , Kaushik, S and Siddagangaiah, A.K.,“Characterization of cement grouted bituminous mixes using marginal aggregates”, Road Materials and Pavement Design, Taylor & Francis (Under review).. [2019-2020]
6. , Gidon, J.S., Sahoo, S. Rainfall-Induced Slope Failures and Use of Bamboo as a Remedial Measure: A Review. Indian Geotech J (2020). https://doi.org/10.1007/s40098-020-00409-3. [2019-2020]
7. , S Das, S Dutta, C Putcha, S Majumdar, D Adak, A Data-Driven Physics-Informed Method for Prognosis of Infrastructure Systems: Theory and Application to Crack Prediction, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 2020, 6 (2), 04020013 – 04020019. [2019-2020]
8. , Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and FRP wrapping”, Structural Engineering and Mechanics, Techno Press. 72(6), pp. 723-736.. [2019-2020]
9. , Comingstarful Marthong (2019). "Behavior of repaired RAC beam-column joints using steel welded wire mesh jacketed with cement mortar” Advance Concrete Construction, Techno Press, 8(2), pp. 91-100.. [2019-2020]
10. , Hopeful Syiemiong, Comingstarful Marthong (2019). "Effect of moisture on the compressive strength of low-strength hollow concrete blocks". Computer and Concrete, Techno Press. 23(4), pp. 267-272. d. Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and galvanized steel wire mesh”, Earthquake and Structures, Techno Press. 16 (3), pp. 253-263.. [2019-2020]
11. , K. Bora, H. M. Kalita, Determination of best groyne combination for mitigating bank erosion, Journal of Hydroinformatics, Vol.- 21, Issue No.- 5, Page No- 875-892, 2019. [2019-2020]
12. , H Song, J Wang, A Garg, X Lin, Q Zheng, S Sharma(2019) Potential of Novel Biochars Produced from Invasive Aquatic Species Outside Food Chain in Removing Ammonium Nitrogen: Comparison with Conventional Biochars and Clinoptilolite, Sustainability 11 (24), 7136- 7156.. [2019-2020]
13. , D. Podder, O.P. Gupta, S. Das, N.R. Mandal, Experimental and numerical investigation of effect of welding sequence on distortion of stiffened panels, Welding in the World, 3rd June, 2019,https://doi.org/10.1007/s40194-019-00747-8. [2019-2020]
14. , H.S. Chouhan, P. Kalla, R. Nagar, P.K. Gautam, Gainful utilization of dimensional limestone waste as fine aggregate in cement mortar mixes, Constr. Build. Mater. 221 (2019) 363–374. https://doi.org/10.1016/j.conbuildmat.2019.06.097.. [2019-2020]
15. , H. Singh Chouhan, P. Kalla, R. Nagar, P. Kumar Gautam, Influence of dimensional stone waste on mechanical and durability properties of mortar: A review, Constr. Build. Mater. 227 (2019) 116662. https://doi.org/10.1016/j.conbuildmat.2019.08.043.. [2019-2020]
16. , Sahoo S., Manna B., Sharma K.G. (2019) Seismic Response of a Steep Nailed Soil Slope: Shaking Table Test and Numerical Studies. In: Sundaram R., Shahu J., Havanagi V. (eds) Geotechnics for Transportation Infrastructure. Lecture Notes in Civil Engineering, vol 28. Springer, Singapore. (DOI: https://doi.org/10.1007/978- 981-13-6701-4_39),(Print ISBN978-981-13-6700-7, Online ISBN978-981-13-6701- 4). [2019-2020]
17. , Dibyendu Adak, Saroj Mandal, Strength and Durability Performance of Fly Ash– Based Process-Modified Geopolymer Concrete. Journal of Materials in Civil Engineering, © ASCE, 2019, 31 (9), 04019174-1 to 04019174-8.. [2019-2020]
18. , Moumita Maiti, Manas Sarkar, Shilang Xu, Sukhen Das, Dibyendu Adak, Soumen Maiti, Application of silica nanoparticles to develop faujasite nanocomposite for heavy metal and carcinogenic dye degradation, Environmental Progress & Sustainable Energy, 38 (S1), S15-S23.. [2019-2020]
19. , Comingstarful Marthong (2019). “Behavior of repaired RAC beam-column joints using steel welded wire mesh jacketed with cement mortar”. Advance Concrete Construction, Techno Press, Accepted.. [2018-2019]
20. , Hopeful Syiemiong, Comingstarful Marthong (2019). “Effect of moisture on the compressive strength of low-strength hollow concrete blocks”. Computer and Concrete, Techno Press. 23(4), pp. 267-272.. [2018-2019]
21. , Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and galvanized steel wire mesh”, Earthquake and Structures, Techno Press. 16 (3), pp. 253-263.. [2018-2019]
22. , H. H. Kalita, R. Das, A. Hajong, N. Kumar, D. Kharnaior, H. C. Dkhar, Experimental and numerical flow simulation over weirs, Water Resources, Accepted for publication.. [2018-2019]
23. , H. M. Kalita, A simple and efficient numerical model for simulating one dimensional dam break flows, International Journal of Hydrology Science and Technology, In press.. [2018-2019]
24. , 6. D. Podder, O.P. Gupta, S. Das, N.R. Mandal, Experimental and numerical investigation of effect of welding sequence on distortion of stiffened panels, Welding in the World, 2019, Accepted, https:// doi.org/10.1007/s40194-019-00747-8.. [2018-2019]
25. , D. Adak, S. Mandal (2019). Strength and Durability Performance of Fly Ash–Based ProcessModified Geopolymer Concrete. Journal of Materials in Civil Engineering, © ASCE, Vol. – 31, Issue No – 9, `Page No - 04019174-1 to 04019174-8.. [2018-2019]
26. , Comingstarful Marthong, Risukka N. Pyrbota, Stevenly L. Trona, Lam-I D. Mawroha, Md. Sakil A. Choudhurya and Ganesh S. Bhartia (2018). “Micro-concrete composites for strengthening of RC frame made of recycled aggregate concrete”, Computers and Concrete, Techno Press, 22 (5), pp. 461-468.. [2018-2019]
27. , Comingstarful Marthong (2018). Behaviour of recycled aggregate concrete beam-column connections in presence of PET fibers at the joint region, Computers and Concrete, Techno Press, 2018, 21(6), pp. 669-679.. [2018-2019]
28. , D. Podder, S. Das, N. R. Mandal, Distortions in Large Stiffened Ship Panels caused by Weldings: An Experimental Study, Journal of Ship Production and Design, 2018, Accepted, https://doi. org/10.5957/JSPD.180019.. [2018-2019]
29. , M. Maiti, M. Sarkar, S. Xu, S. Das, D. Adak (2018). Application of silica nanoparticles to develop faujasite nano-composite for heavy metal and carcinogenic dye degradation. Environmental Progress & Sustainable Energy, Vol. – 38, Issue - s1, Page no - S15 - S23.. [2018-2019]
30. , P. Pathak, S. Sharma, Sorption isotherms, kinetics and thermodynamics of the contaminants onto Indian soils, Journal of Environmental Engineering, ASCE, Vol.144 (10), 2018.. [2018-2019]
31. , N.Koshy, S.S U, S.Sharma,J. Joseph,V.Sharma, D.N. Singh, B. Jha, Characterization of the Soil Samples from the Lonar Crater, India, Geotechnical Engineering Journal of the SEAGS & AGSSEA, Vol.49(10), 2018.. [2018-2019]
32. , H. M. Kalita, A. K. Sarma, An implicit scheme for shallow water flow with wet dry interface, Water Resources, Vol.-45, Issue No.-1, Page Nos -61–68, 2018.. [2017-2018]
33. , H. M. Kalita, A simple and efficient numerical model for simulating one dimensional dam break flows, Int. J. Hydrology Science and Technology (In press). [2017-2018]
34. , Chakraborty R., Dey A. (2018) Effect of Toe Cutting on Hillslope Stability. In: I.V. A., Maji V. (eds) Geotechnical Applications. Lecture Notes in Civil Engineering, vol 13. Springer, Singapore.. [2017-2018]
35. , K. Khate, M. L. Patton, C. Marthong, Structural behaviour of stainless steel stub column under axial compression: a FE study, International Journal of Steel Structures, Springer, Vol.-18, Page Nos -1-18, 2018.. [2017-2018]
36. , K. Khate, M. L. Patton, C. Marthong, Numerical Modelling of lean duplex stainless steel stub column built-up sections under pure axial compression, Journal of Advanced Research in Dynamical and control systems, Vol.-10, Page Nos -948-959, 2018.. [2017-2018]
37. , Sahoo, S., Manna, B. and Sharma, K. G. (2018). “Seismic response of a steep nailed soil slope: Shaking table test and numerical studies.” International Symposium on Geotechnics of Transportation Infrastructure (ISGTI 2018), IIT Delhi, India, April 07-08.. [2017-2018]
38. , P. Pathak and S. Sharma, Sorption isotherms, kinetics and thermodynamics of the contaminants onto Indian soils, Journal of Environmental Engineering, Journal of Environmental Engineering, ASCE, Vol. 144, Issue 10, 2018.. [2017-2018]
39. , N. Koshy, S.S U, S.Sharma, J. Joseph,V.Sharma and D.N. Singh, B. Jha, Characterization of the Soil Samples from the Lonar Crater, India, Geotechnical Engineering Journal of the SEAGS & AGSSEA, Vol.49, Issue 1, 2018.. [2017-2018]
40. , C. Marthong, A.S. Sangma, S.A. Choudhury, R.N. Pyrbot, S.L. Tron, L. Mawroh, G.S. Bharti (2017). “Structural Behavior of Recycled Aggregate Concrete Beam-Column Connection in Presence of Micro Concrete at Joint Region”, 11, 243-251.. [2017-2018]
41. , Comingstarful Marthong (2018). “Behaviour of recycled aggregate concrete beam-column connections in presence of PET fibers at the joint region,” Computers and Concrete, Techno Press, 21 (6), pp. 669-679.. [2017-2018]
42. , Sahoo, S., Manna, B. and Sharma, K. G. (2017). “Seismic stability of a steep nailed soil slope- Shaking table testing and numerical analysis.” 19th International Conference on Soil Mechanics and Geotechnical Engineering (19th ICSMGE), Seoul, Republic of Korea, September 17-22, pp. 2195-2198.. [2017-2018]
43. , C. Marthong, A. S. Sangma, Md. S. A.Choudhury, R. N. Pyrbot, S. L. Tron ,L. Mawroh, G. S. Bharti, Structural Behavior of Recycled Aggregate Concrete Beam-Column Connection in Presence of Micro Concrete at Joint Region, Structures, Elsevier, Vol.-11, Page Nos -243–251, 2017.. [2017-2018]
44. , M. L. Patton, K. D. Singh, Buckling of fixed-ended concrete-filled steel columns under axial compression, International Journal of Steel Structures, Springer, Vol.-17(3), 1-13, 2017.. [2017-2018]
45. , D. Podder, A. Gadagi, N. R. Mandal, S. Kumar, L. Singh, and S. Das, Numerical investigation on the effect of thermomechanical tensioning on the residual stresses in thin stiffened panels, Journal of Ship Production and Design, Vol.-33, Issue No.-1, Page Nos -1-11, 2017.. [2017-2018]
46. , A. Gadagi, N. R. Mandal, D. Podder, S. Kumar, Experimental and numerical investigation on the effect of Thermo-Mechanical Tensioning on weld induced out-of-plane distortion, Journal of Ship Production and Design, Issue No.-Accepted, 2017.. [2017-2018]
47. , Dibyendu Adak, Manas Sarkar, Saroj Mandal. Structural behavior of nano-silica modified fly ash based geopolymer concrete, Construction and Building Materials, 135, 2017, 430–439.. [2017-2018]
48. , SJ Chithambaram, S Kumar, MM Prasad, D Adak, Effect of parameters on the compressive strength of fly ash based geopolymer concrete. Structural concrete, https://doi.org/10.1002/suco.201700235. 8. M Maiti, M Sarkar, S Xu, S Das, D Adak, S Maiti, Application of silica nanoparticles to develop faujasite nano-composite for heavy metal and carcinogenic dye degradation. Environmental Progress & Sustainable Energy, https://doi.org/10.1002/ ep.12904. [2017-2018]
49. , C. Marthong and D.K.Sarma, Influence of PET fiber geometry on the mechanical properties of concrete: An experimental investigation, European Journal of Environmental and Civil Engineering, Vol.-20, Issue No.-7, Page Nos -771-784, 2016.. [2016-2017]
50. , C. Marthong, A. Dutta and S.K Deb, Effect of Cyclic Loading Frequency on the Behaviour of exterior RC Beam-Column Connections, Journal of Earthquake Engineering, Vol.-20, Issue No.-7, Page Nos -1126-1147, 2016.. [2016-2017]
51. , C. Marthong, S.K. Deb and A. Dutta Deb, Effect of loading rates on the behavior of epoxy repaired RC beam-column connections, European Journal of Environmental and Civil Engineering, Issue No.-Accepted, Page Nos -1-26, 2016.. [2016-2017]
52. , C. Marthong, A. S. Sangma, Md. S. A.Choudhury, R. N. Pyrbot, S. L. Tron ,L. Mawroh, G. S. Bharti, Structural Behavior of Recycled Aggregate Concrete Beam-Column Connection in Presence of Micro Concrete at Joint Region, Structures, Elsevier, Vol.-11, Page Nos -243–251, 2017. [2016-2017]
53. , M. L. Patton, K. D. Singh, Buckling of fixed-ended concrete-filled steel columns under axial compression, International Journal of Steel Structures, Springer, Vol.-17(3), 1-13, 2017.. [2016-2017]
54. , Sarmah, R and Barua, G. (2017). “Analysis of three-dimensional transient seepage into ditchdrains from a ponded field.” Sadhana, 42(5), 769–793, 2015. [2016-2017]
55. , D. Podder, A. Gadagi, N. R. Mandal, S. Kumar, L. Singh, and S. Das, Numerical investigation on the effect of thermomechanical tensioning on the residual stresses in thin stiffened panels, Journal of Ship Production and Design, Vol.-33, Issue No.-1, Page Nos -1-11, 2017.. [2016-2017]
56. , A. Gadagi, N. R. Mandal, D. Podder, S. Kumar, Experimental and numerical investigation on the effect of Thermo-Mechanical Tensioning on weld induced out-of-plane distortion, Journal of Ship Production and Design, Issue No.-Accepted, 2017.. [2016-2017]
57. , D. Podder, A. Gadagi, N. R. Mandal, S. Das, In sight of a fillet welded T-joint based on the method of average welding forces, Journal of ship production and design, Vol.-32, Issue No.-4, Page Nos -206-215, 2016.. [2016-2017]
58. , H. M. Kalita, A. K. Sarma, An implicit scheme for shallow water flow with wet dry interface, Water Resources, In press. [2016-2017]
59. , Kalita, H. M., Sarma, A. K., and Bhattacharjya, R. K. (2014), “Evaluation of Optimal River Training Work Using GA Based Linked Simulation Optimization Approach”, Water Resources Management, Springer. Volume 28, Number 8, pp 2077- 2092.. [2015-2016]
60. , Patton, M.L. & Singh, K.D., 2014. “Finite element modelling of concrete-filled lean duplex stainless steel tubular stub columns”. International Journal of Steel Structures, Springer; 14: 619-632.. [2015-2016]
61. , Marthong C. and Marthong S. (2015). Enhancing mechanical properties of concrete prepared with coarse recycled aggregates.The IES Journal Part A: Civil & Structural Engineering, Vol. 8 (3), pp. 175 - 183.. [2015-2016]
62. , Marthong, C., Dutta, A. and Deb, S.K. (2015). “Study on size effect of RC and Rehabilitated exterior beam-column connections under cyclic loading” European Journal of Environmental and Civil Engineering, DOI: 10.1080/19648189.2015.1056385.. [2015-2016]
63. , Marthong C. (2015). Effects of PET fiber arrangement and dimensions on mechanical properties of concrete. The IES Journal Part A: Civil & Structural Engineering, Vol. 8 (2), pp. 111 – 120.. [2015-2016]
64. , Sonowal, P., Khwairkpam, M., Kalamdhad, A. S., (2015). Vermicomposting of Dewatered Sludge from Pulp and Paper mill. Int. J. of Environment and Waste Management, 15(1), 24-38.. [2015-2016]